Insert a SIM card and battery
Important: This device is designed to be used with a standard SIM card (see
figure) only. Use of incompatible SIM cards may damage the card or the device, and
may corrupt data stored on the card. Please consult your mobile operator for the use
of a SIM card that has a mini-UICC cutout.
This phone is intended for use with a BL-5J battery. Always use original Nokia
batteries.
If you only have one SIM card, insert the card into the internal SIM card holder.
6
Get started
1 Place your finger in the recess at the bottom of the phone, and carefully lift and
remove the back cover.
2 If the battery is inserted, lift it out.
3 Slide the SIM card holder to unlock it (1), and use your fingernail to lift it. Make
sure the contact area would face down when the SIM card holder is lowered (2),
insert the SIM card into the holder, and lower the holder (3). Slide the card holder
to lock it (4).
4 Line up the contacts of the battery and the battery compartment, and insert the
battery. To replace the back cover, direct the top locking catches toward their
slots, and press down until the cover locks into place.